|
Quality plates need quality solvents
For users of washout solvents that carry out in house reclamation of the solvent, C.K.Chemicals provides a free lab testing service to monitor the continuing quality and balance of the solvent. A test report and solvent control advice will be supplied. It is recommended that this facility is utilised and samples submitted approx every 10 reclamation cycles, or once every 4-6 weeks. |
|
| The C.K. Flexographic Washout Solvents |
|
|
|
|
Perkanol |
|
The traditional solvent. Mostly replaced by the more modern alternatives and 3rd generation solvents. |
|
|
|
|
|
Superflex |
|
One of the original alternative solvents now widely used by many flexo plate makers. |
|
|
|
|
|
Superflex FD |
|
The faster drying version of Superflex. |
|
|
|
|
|
Superflex II |
|
Low odour slower drying version of Superflex. |
|
|
|
|
|
Flexowash |
|
Low odour, slower drying, wash out solvent. |
|
|
|
|
|
| 3rd Generation G-Solve Range |
|
|
|
|
G-Solve I |
|
Widely used in all applications with most brands of polymer. |
|
|
|
|
|
G-Solve II |
|
Widely used in all applications with most brands of polymer. Slighly higher solvency power. |
|
|
|
|
|
G-Solve III |
|
Widely used in all applications with most brands of polymer. Most suitable for users with inhouse reclamation and high carbon layer build up. |
|
|
|
|
|
| Flexo Accessory Products |
|
|
|
|
Flexo-Stat
|
|
Flexo-stat is the antistatic additive for petroleum based washout solvents. Flexo-Stat helps control the dissipation of static electricity and ensure obligations under Atex regulations are observed.
All the C.K. range of solvents contain Flexo-Stat when supplied but this should also be added to solvent reclaimed in house by the user.
Technical data sheet is available. |
|
|
|
|
|
Flexi-Wipe |
|
Flexi-wipe is a very fast drying wipe solution for use on the back of polymer plates after processing, and can be used for many other print applications where fast drying is essential. |
|
|
|
|
| |
